LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 860 (Seat System) >> Repair Instructions >> Seat Replacement - Bucket >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front seat to the studs on the floor pan.
  2. Connect the seat electrical connectors.
  3. Install the nuts to the seat floor pan studs.

    Tighten 

    Tighten the front bucket seat adjuster-to-floor pan nuts to 50 N.m (37 lb ft).

    Inspect the front bucket seat for proper operation and adjustment.

  4. Enable the SIR system. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM .
    Fig 1: Installing Front Seat Adjuster Nuts And Connecting Seat Electrical Connectors
    G01518019Courtesy of GENERAL MOTORS CORP.