LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Automatic Transmission Servicing) >> Removal & Installation >> Shift Cable (Floor Shift) >> Removal

Shift Cable (Floor Shift): Removal

WARNING: This page is about a different car, the 2002 GMC Sonoma, 2002 GMC Jimmy, 2002 Chevrolet S10 Pickup, and 2002 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply parking brake and block wheels. Remove the left front mat and carpet as necessary. Remove the console. See REMOVAL & INSTALLATION in appropriate SHIFT INTERLOCK SYSTEMS article in AUTOMATIC TRANSMISSIONS.
  2. Ensure the transmission is in the mechanical Neutral position. Remove the retainer securing the shift cable to the shift controller. See Figure.
  3. Remove the tape and grommet on the shift cable from the floor panel. See Figure.
  4. Raise and support the vehicle. Remove the retainer from the shift cable and transmission bracket. See Figure. Remove the shift cable end from the gearshift lever stud ball. Remove the cable from the vehicle.
scientia non olet · About LEMON Manuals