Extension Housing Assembly: Removal
WARNING: This page is about a different car, the 2002 GMC Sonoma, 2002 GMC Jimmy, 2002 Chevrolet S10 Pickup, and 2002 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and suitably support the vehicle. Support the transmission with a transmission jack. Place a drain pan under the vehicle.
- Remove the propeller shaft. See appropriate DRIVE SHAFTS & UNIVERSAL JOINTS article in DRIVE AXLES. Remove the transmission mount.
- Remove the case extension bolts (1). Remove the case extension (2). See Figure. Remove and discard the case extension O-ring seal (3).