Installation Procedure
WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Align the retainers on the I/P accessory trim plate to the slots in the I/P.
- Install the retainers into the slots until the retainers are fully seated.
- Install the 2 screws to the lower trim plate.
Tighten
Tighten the screws to 2 N.m (18 lb in).
- Install the front floor console. Refer to TRIM PLATE REPLACEMENT - FRONT FLOOR CONSOLE (AZTEK) or TRIM PLATE REPLACEMENT - FRONT FLOOR CONSOLE (RENDEZVOUS) .