LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 859 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Lock Cylinder Replacement - Instrument Panel (I/P) Compartment >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the instrument panel (I/P) compartment door.
  2. Remove the I/P compartment handle screws. Refer to HANDLE REPLACEMENT - INSTRUMENT PANEL (I/P) COMPARTMENT (AZTEK)  or HANDLE REPLACEMENT - INSTRUMENT PANEL (I/P) COMPARTMENT (RENDEZVOUS)  .
  3. Remove the I/P compartment handle from the I/P compartment.
  4. Insert the key into the I/P compartment door lock cylinder.
  5. Insert a small diameter tool into the slot on the upper side of the door handle cylinder housing. Depress and hold the lock cylinder retainer.
  6. While the lock cylinder retainer is still depressed, turn the key clockwise to the 3 o'clock position.
    Fig 1: Inserting Key Into I/P Compartment Door Lock Cylinder
    G01517724Courtesy of GENERAL MOTORS CORP.
  7. Pull to remove the lock cylinder.
    Fig 2: Removing Lock Cylinder
    G01517725Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals