LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 859 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Head Up Display Switch Replacement (Rendezvous) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the electrical connectors to the head up display switch.
    Fig 1: Installing Electrical Connectors To Head Up Display Switch
    G01517681Courtesy of GENERAL MOTORS CORP.
  2. Install the head up display switch to the cluster trim plate.
    Fig 2: Installing Head Up Display Switch To Cluster Trim Plate
    G01517682Courtesy of GENERAL MOTORS CORP.
  3. Push the switch assembly to the cluster trim plate until seated.
    Fig 3: Pushing Switch Assembly To Cluster Trim Plate
    G01517683Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals