LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 859 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Driver Information Center Switch Replacement (Aztek) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connectors to the switch.
    Fig 1: Connecting Electrical Connectors To Switch
    G01517742Courtesy of GENERAL MOTORS CORP.
  2. Install the driver information center switch to the IP trim plate.
  3. Push the switch assembly to the IP trim plate until the assembly is fully seated.
    Fig 2: Installing Driver Information Center Switch To IP Trim Plate
    G01517743Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals