LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 859 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Console Replacement - Front Floor (Rendezvous) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the front floor console to the floor.
  2. Connect the required electrical connectors.
    Fig 1: Aligning Front Floor Console To Floor
    G01517800Courtesy of GENERAL MOTORS CORP.
  3. Install the nuts to the side of the front floor console.

    Tighten 

    Tighten the nuts to 6 N.m (53 lb in)

  4. Install the front floor console trim plate. Refer to TRIM PLATE REPLACEMENT - FRONT FLOOR CONSOLE (AZTEK)  or TRIM PLATE REPLACEMENT - FRONT FLOOR CONSOLE (RENDEZVOUS)  .
    Fig 2: Installing Front Floor Console
    G01517801Courtesy of GENERAL MOTORS CORP.