Removal Procedure
WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the power accessory port socket by placing one side of J 42059 into the tab window and angle the other side into the opposite tab window. Pull the power accessory port socket straight out.
- Remove J 42059 from the power accessory port socket.
- Disconnect the electrical connector from the front floor console power accessory port.
- Remove the power accessory port retainer using your index finger and pulling out.