Removal Procedure
WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle.
- Remove the left front tire and wheel.
- Remove the left engine splash shield. Refer to SPLASH SHIELD REPLACEMENT -- ENGINE .
- Use a utility stand with a block of wood in order to support the transaxle.
- Remove the transaxle mount upper nuts.
- Remove the transaxle mount bracket bolts.
- Remove the transaxle mount bracket.