Installation Procedure
WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Install the air deflector to the trim plate from the front.
- Push on the deflector until the deflector is firmly seated.
- Verify proper movement of the air deflector.
- Push the air duct onto the trim plate until the air duct is firmly seated.
- Install the trim plate to the console. Refer to TRIM PLATE REPLACEMENT -- CONSOLE REAR (RENDEZVOUS) .