LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 845 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Heater Hose Replacement - Inlet >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the inlet heater hose.
  2. Connect the inlet heater hose to the heater core.
  3. Connect the heater hose clamp using the J 38185  .
    Fig 1: Installing Inlet Heater Hose
    G01498923Courtesy of GENERAL MOTORS CORP.
  4. Connect the inlet heater hose (1) to the inlet pipe (2).
  5. Install the transmission fluid filler tube. Refer to FLUID FILLER TUBE REPLACEMENT .
  6. Connect the throttle and cruise control cables to the TBI mounting bracket.
  7. Install the air cleaner cover and intake tube.
  8. Connect the vacuum hose to the brake booster.
  9. Install the wiper motor module assembly. Refer to WIPER MOTOR MODULE REPLACEMENT .
  10. Fill the cooling system. Refer to DRAINING AND FILLING COOLING SYSTEM .
    Fig 2: Connecting Vacuum Hose To Brake Booster.
    G01498924Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals