Removal Procedure
WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Disable the SIR system. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM .
- Remove the inflator module. Refer to SENSING & DIAGNOSTIC MODULE (SDM) .
- Disconnect the steering wheel control electrical connector.
- Remove the steering wheel nut.
- Install J 42578 and J 1859-A to the steering wheel.
- Use J 42578 and J 1859-A in order to remove the steering wheel.
- Remove J 42578 and J 1859-A from the steering wheel.
- Remove the controls and the control harness from the steering wheel.