LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Automatic Transmission Servicing) >> Removal & Installation >> Filler Tube (4L80-E) >> Installation

Filler Tube (4L80-E): Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, 2002 Chevrolet RV Cutaway, and 2002 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a NEW oil level indicator tube seal into the transmission case. Install the bottom of oil level indicator tube into the seal. See Fig 1 . Remove the safety stands. Lower the vehicle.
  2. On 6.5L models, install the bolt and the nut securing the oil level indicator tube brackets to the engine. Tighten the bolt and nut to specification. See TORQUE SPECIFICATIONS  .
  3. On 8.1L models, install the nut securing the oil level indicator tube to the transmission stud and tighten the nut to specification. See TORQUE SPECIFICATIONS  . On all models, install the air cleaner.
  4. Install the oil level indicator. Adjust fluid level as necessary. See LUBRICATION  .
Fig 1: Removing & Installing Filler Tube
G00089909Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals