LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Automatic Transmission Servicing) >> Removal & Installation >> Filler Tube (4L60-E) >> Installation

Filler Tube (4L60-E): Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2002 GMC Savana Special, 2002 GMC Savana Camper Special, 2002 GMC Savana, 2002 Chevrolet RV Cutaway, and 2002 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new filler tube seal into the transmission case. Install the filler tube into the seal. See Fig 1 .
  2. Install the bolt securing the filler tube bracket to the transmission and tighten to specification. See TORQUE SPECIFICATIONS  .
  3. Install the bolt securing the filler tube bracket to the engine and tighten to specification See TORQUE SPECIFICATIONS  .
  4. Lower the vehicle. Install the oil level indicator. Adjust fluid level as necessary. See LUBRICATION  .
Fig 1: Removing & Installing Filler Tube
G00089908Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals