LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 834 (Engine Mechanical - 4.8L, 5.3L & 6.0L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Drive Belt Idler Pulley Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the drive belt idler pulley bolt.
  2. Remove the accessory drive belt. Refer to DRIVE BELT REPLACEMENT - ACCESSORY  .
  3. Remove the drive belt idler pulley and bolt.
    Fig 1: Removing Procedure Drive Belt Idler Pulley
    G02116296Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals