LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 833 (Transfer Case - NVG 236/246-NP8) >> Repair Instructions >> Transfer Case Adapter Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transfer case. Refer to TRANSFER CASE ASSEMBLY REPLACEMENT  .
  2. Support the transmission with a suitable jack stand.
  3. Remove the transmission mount nuts.
    Fig 1: Removing Transmission Mount Nuts
    G01456651Courtesy of GENERAL MOTORS CORP.
  4. Remove the crossmember bolts.
  5. Remove the crossmember.
    Fig 2: Removing Crossmember & Bolts
    G01456652Courtesy of GENERAL MOTORS CORP.
  6. Remove the transmission mount bolts.
    Fig 3: Removing Transmission Mount Bolts
    G01456653Courtesy of GENERAL MOTORS CORP.
  7. Remove the transmission mount.
    Fig 4: Removing Transmission Mount
    G01456654Courtesy of GENERAL MOTORS CORP.
  8. Remove the transfer case adapter bolts.
  9. Remove the transfer case adapter.
  10. Remove the transfer case seal.
    Fig 5: Removing Transfer Case Adapter, Bolts & Seal
    G01456655Courtesy of GENERAL MOTORS CORP.
  11. Remove the transfer case gasket, if necessary.
    Fig 6: Removing Transfer Case Gasket
    G01456656Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals