LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 821 (Vibration Symptoms Diagnosis And Correction) >> Description and Operation >> Electronic Vibration Analyzer (EVA) Description and Operation >> EVA Vibration Sensor Placement

EVA Vibration Sensor Placement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Proper placement of the J 38792-A vibration sensor (accelerometer) is critical to ensure that proper vibration readings are obtained by the J 38792-A. The vibration sensor should be placed on the specific vehicle component identified as being the most respondent to the vibration. If no component has been identified, install the sensor to the steering column as a starting point.

scientia non olet · About LEMON Manuals