LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 819 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Compressor Oil Balancing >> Draining

Compressor Oil Balancing: Draining

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Important:  Drain and measure as much of the refrigerant oil as possible from the removed compressor.

  1. Drain the oil from both the suction and discharge ports of the removed compressor into a clean, graduated container.

    Rotate the compressor shaft to assist in draining the compressor.

  2. Measure and record the amount of oil drained from the removed compressor.

    This measurement will be used during installation of the replacement compressor.

  3. Properly discard the used refrigerant oil.
    Fig 1: Draining And Measuring Refrigerant Oil From Compressor
    G01454186Courtesy of GENERAL MOTORS CORP.