LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 818 (Seat Belt System) >> Repair Instructions >> Seat Belt Replacement - Center Rear >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat belt guide cover (1).
  2. Remove the rear seat armrest. Refer to ARMREST REPLACEMENT - REAR SEAT (BUCKET) or ARMREST REPLACEMENT - REAR SEAT (60/40 SPLIT) in SEAT SYSTEM .
    Fig 1: Removing Seat Belt Guide Cover
    G01459699Courtesy of GENERAL MOTORS CORP.
  3. Release the J-Clip from under the center armrest.
  4. Remove the nut from the seat belt retractor.
    Fig 2: Removing Nut From Seat Belt Retractor
    G01459700Courtesy of GENERAL MOTORS CORP.
  5. Remove the bolt (1) from the seat belt anchor.
    Fig 3: Removing Bolt From Seat Belt Anchor
    G01459701Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals