LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 814 (Exterior Trim) >> Repair Instructions >> Molding Replacement - Rear Body Side - Lower Rear (Z-71) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 3 push-pins from the lower rear body molding.
  2. Remove the molding from the vehicle.
    3. Fig 1: Removing Rear Body Side Lower Rear (Molding Z-71)
    G01458445Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals