LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 814 (Exterior Trim) >> Repair Instructions >> Molding Replacement - Hood Front >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the molding retainer clips to the slots in the hood.
    2. Fig 1: Installing Molding - Hood Front
    G01458424Courtesy of GENERAL MOTORS CORP.
  2. Starting from the middle of the molding, press in the retainers until the molding is fully seated.
  3. Close the hood.
scientia non olet · About LEMON Manuals