Third and Fourth Clutch Accumulator Disassembly
WARNING: This page is about a different car, the 2003 GMC Yukon XL, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Important: Apply low pressure compressed air to the hole at the top of the accumulator housing to assist with the piston removal.
- Remove the 3rd clutch accumulator piston (2).
- Remove the 3rd clutch accumulator piston seals (1, 3).
- Remove the 4th clutch accumulator piston pin retainer ring (5).
- Remove the 4th clutch accumulator piston (4) and pin (2) from the accumulator housing (1).
- Remove the 4th clutch accumulator piston pin (2) from the accumulator housing (1).
- Remove the 4th clutch accumulator piston seal (3) from the accumulator housing (1).