LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 812 (Automatic Transmission - 4L60-E/4L65-E (Service & Replacement)) >> Repair Instructions >> Transmission Extension Housing Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the propeller shaft. Refer to PROPELLER SHAFT REPLACEMENT -- REAR in Propeller Shaft.
  2. Remove the transmission mount. Refer to TRANSMISSION MOUNT .
  3. Support the transmission with a transmission jack.
  4. Place a drain pan under the vehicle.
  5. Remove the case extension bolts (1).
  6. Remove the case extension (2).
  7. Remove and discard the case extension O-ring seal (3).
    Fig 1: Removing Transmission Extension Housing Assembly
    G02111862Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals