Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Yukon, 2003 Cadillac Escalade EXT, 2003 Cadillac Escalade ESV, and 2003 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Install the speed sensor with a NEW O-ring.
Tighten

Tighten the sensor to 17 N.m (13 lb ft).

Fig 1: Installing Speed Sensor With O-Ring
Courtesy of GENERAL MOTORS CORP.
Connect the speed sensor electrical connector (4).
Lower the vehicle.

Fig 2: Connecting Speed Sensor Electrical Connector
Courtesy of GENERAL MOTORS CORP.