LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 806 (Body Rear End) >> Repair Instructions >> Lock Actuator Replacement - Door (Lift Gate) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the upper and lower trim panels. Refer to TRIM PANEL REPLACEMENT - LIFT GATE  .
  2. Disconnect the electrical connectors.
  3. Remove the cables attached to actuator assembly.
  4. Remove the bolts from the latch actuator.
    5. Fig 1: Removing Bolts From Latch Actuator
    G01459504Courtesy of GENERAL MOTORS CORP.
  5. Remove the actuator from the lift gate.
  6. Remove the lift gate lock cylinder. Refer to LOCK CYLINDER REPLACEMENT - LIFT GATE  .
scientia non olet · About LEMON Manuals