LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 806 (Body Rear End) >> Repair Instructions >> Hinge Replacement - Removable Rear Panel - Mid Gate >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fold the rear seat back down.
  2. Ensure the rear mid gate is in the upright position, latched.
  3. Remove the hinge trim cover (1) from the mid-gate.
  4. Fig 1: Removing Retaining Nuts From Hinge Trim Cover
    G01459370Courtesy of GENERAL MOTORS CORP.
  5. Remove the retaining nuts from the hinge.
  6. Remove the hinge from the vehicle.