LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 801 (Lighting Systems) >> Repair Instructions >> Park/Turn Signal Lamp Replacement (Except Avalanche) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure the headlamp switch is in the OFF position.
  2. Remove the headlamp. Refer to HEADLAMP ASSEMBLY OR HEADLAMP BULB REPLACEMENT (EXCEPT AVALANCHE)  or HEADLAMP ASSEMBLY OR HEADLAMP BULB REPLACEMENT (AVALANCHE)  or HEADLAMP ASSEMBLY OR HEADLAMP BULB REPLACEMENT (CADILLAC)  or HEADLAMP ASSEMBLY OR HEADLAMP BULB REPLACEMENT (HID)  .
  3. Remove the park/turn signal lamp assembly by pushing on the inboard retainer clip.
  4. Disconnect the electrical connector from the park/turn signal lamp.
    5. Fig 1: Removing Procedure Park/Turn Signal Lamp (Except Avalanche)
    G01457616Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals