LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 801 (Lighting Systems) >> Repair Instructions >> Headlamp Assembly or Headlamp Bulb Replacement (Except Avalanche) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
  • Replace a high beam bulb with another high beam bulb. The high beam bulb has a red gasket.
  • Replace a low beam bulb with another low beam bulb. The low beam bulb has a gray tip and a yellow gasket at the base.
  1. Install the new bulb to the headlamp assembly by twisting the bulb clockwise in order to lock in place.
    2. Fig 1: Installing Bulb To Headlamp Assembly
    G01457572Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connector to the bulb.
  3. Install the headlamp assembly.
  4. Install the headlamp retainer pins.
    5. Fig 2: Installing Headlamp Retainer Pins
    G01457573Courtesy of GENERAL MOTORS CORP.
  5. Rotate inward and lock the pins in place.
  6. Inspect the operation.
    7. Fig 3: Inspecting Operation
    G01457574Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals