Activating System (Windstar)
WARNING: This page does not describe the selected car, but rather 114 other vehicles, including the 2000 Saturn SW2, 2000 Saturn SL2, 2000 Saturn SL1, 2000 Saturn SL, and 2000 Saturn SC2. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative battery cable. Wait at least one minute for backup power supply to deplete stored energy. Remove air bag simulator from clockspring connector at top of steering column. Reconnect air bag module connector. Install steering wheel access panel.
- Remove air bag simulator from passenger air bag vehicle harness connector. Reconnect air bag module connector. Restore glove box to original position.
- Disconnect side air bag simulators. Reconnect side air bag module connectors. Reconnect negative battery cable. Recheck system operation. Perform SYSTEM OPERATION CHECK . Reprogram USER 1 and USER 2 preset radio frequencies and set clock.