LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 795 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Console Replacement (with Console Mounting Bracket) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove both front seats. Refer to SEAT REPLACEMENT - FRONT BUCKET in Seats.
  2. If equipped with a Bose® amplifier, remove the radio amp fuse located under the hood electrical center.
  3. Remove the upper console bezel. Refer to BEZEL REPLACEMENT - FLOOR CONSOLE (NON-LUXURY UPPER)  or BEZEL REPLACEMENT - FLOOR CONSOLE (LUXURY UPPER)  or BEZEL REPLACEMENT - FLOOR CONSOLE (NON-LUX LOWER)  .
    Fig 1: Removing Console - With Console Mounting Bracket
    G01458173Courtesy of GENERAL MOTORS CORP.
  4. Remove the cupholder. Refer to CUPHOLDER REPLACEMENT (NON-LUXURY)  or CUPHOLDER REPLACEMENT (LUXURY)  or CUPHOLDER REPLACEMENT (REAR)  .
  5. Remove the screws (1) retaining the console to the I/P.
  6. Disconnect the wire connectors.
  7. Remove the console assembly from the vehicle.
  8. Remove the rear seat audio control from the console, if equipped.