LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 787 (Antilock Brake System With TCVS & VSES) >> Repair Instructions >> Traction Control Switch Replacement (Stabilitrak) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel (I/P) bezel. Refer to BEZEL REPLACEMENT - INSTRUMENT PANEL (I/P) CLUSTER in Instrument Panel, Gages and Console.
  2. Gently lift the retaining tabs (2) and remove the stabilitrak switch (3) from the I/P assembly (1).
    3. Fig 1: Removing Stabilitrak Switch From I/P Assembly
    G01457176Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the harness connector from the stabilitrak switch.
    4. Fig 2: Disconnecting Harness Connector From Stabilitrak Switch
    G01457177Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals