LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 787 (Antilock Brake System With TCVS & VSES) >> Diagnostic Information and Procedures >> DTC C0283 (W/JL4): VSES Switch Circuit >> Circuit Description

Circuit Description

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

The traction control switch is a momentary-contact, normally-open switch that can be used to disable the engine torque management function of the TCS.

On two wheel drive or all wheel drive vehicles, the traction control switch is directly monitored by the EBCM. On four wheel drive vehicles equipped with selectable 4 LO, the traction control switch is monitored by the transfer case shift control module (TCSCM), which sends the traction control switch status information to the EBCM on the serial data link. Each time the traction control switch is pressed, the VSES and TCS enabled/disabled status changes. When TCS is disabled, the EBCM sends serial data messages to the IPC to turn ON the traction off indicator and display the stability system disabled message.