LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 785 (Exterior Trim) >> Repair Instructions >> Molding Replacement - Hood Front >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Hood Front Molding
    GM717726Courtesy of GENERAL MOTORS CORP.
  1. Position the molding retainer clips to the slots in the hood.
  2. Starting from the middle of the molding, press in the retainers until the molding is fully seated.
  3. Close the hood.
scientia non olet · About LEMON Manuals