LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 783 (Engine Mechanical - 4.3L (Unit Repair)) >> Repair Instructions >> Crankshaft and Bearings Cleaning and Inspection >> Measuring Connecting Rod Bearing Side Clearance

Measuring Connecting Rod Bearing Side Clearance

WARNING: This page is about a different car, the 2002 GMC Savana and 2002 Chevrolet Chevy Express. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert a feeler gage between the connecting rod caps and measure the connecting rod side clearance. The proper connecting rod side clearance specification is 0.15-0.44 mm (0.006-0.017 in).
  2. Connecting rod side clearances may also be measured with a dial indicator set.
    Fig 1: Measuring Connecting Rod Side Clearance
    G01689691Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals