Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Safari and 2002 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
- Install the wiper transmission on the vehicle.
- Install the transmission to cowl nuts. Tighten the transmission nuts to 14 N.m (10 lb ft).
Important: Assemble the wiper transmission to the crank arm past the second detent so that the seal is compressed to a maximum height of 25.5 mm (1.0 in). Lubricate the inside of the socket with a lithium-based grease (GM P/N 1050109, 1052196 or equivalent).
- Connect the transmission drive link to the wiper motor crank arm using the J 39529.
- Install the air inlet grille panel.
- Install the wiper arms.