LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 775 (Tires & Wheels) >> Repair Instructions >> Tire Hoist and Shaft Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the spare wheel stowage lock cylinder.
    Fig 1: Locating Spare Wheel Stowage
    G01662820Courtesy of GENERAL MOTORS CORP.
  2. Remove the spare tire from the hoist.
    Fig 2: Removing Spare Tire
    G01662821Courtesy of GENERAL MOTORS CORP.
  3. Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE in General Information.
  4. Remove the spare tire wheel hoist guide retaining clips from the bumper (1).
    Fig 3: Removing Spare Tire Wheel Hoist Guide Retaining Clips From Bumper
    G01662822Courtesy of GENERAL MOTORS CORP.
  5. Remove the spare wheel hoist shaft guide (2) from the bumper.
    Fig 4: Removing Spare Wheel Hoist Shaft Guide From Bumper
    G01662823Courtesy of GENERAL MOTORS CORP.
  6. Remove the spare wheel hoist shaft guide from the spare wheel hoist.
    Fig 5: Removing Spare Wheel Hoist Shaft Guide From Spare Wheel Hoist
    G01662824Courtesy of GENERAL MOTORS CORP.
  7. Remove the bolt.
  8. Remove the hoist from the bracket.
    Fig 6: Removing Hoist From The Bracket
    G01662825Courtesy of GENERAL MOTORS CORP.