LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 771 (Parking Brake System) >> Repair Instructions >> Park Brake Pedal Assembly Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Safari and 2002 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the park brake cable housing to the park brake pedal assembly. Ensure that the locking tabs secure the housing to the assembly.
  2. Connect the park brake cable (3) to the lever assembly. Bend the locating tab over the cable.
  3. Install the lever assembly to the vehicle.
  4. Install the bolts (2). Tighten the bolts to 24 N.m (18 lb ft).
  5. Connect the connector to the park brake switch.
  6. Install the release handle to the instrument panel. Ensure the locking tabs secure the handle to the instrument panel.
  7. Install the release handle grommet and cable to the park brake pedal assembly.
  8. Adjust the park brake. Refer to Park Brake Adjustment .
scientia non olet · About LEMON Manuals