Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Safari and 2002 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
- Install the front cable.
- Secure the grommet (4) to the body.
- Clip the cable at the kick panel.
- Connect the cable (1) to the lever assembly (2).
- Install the lever assembly. Refer to Park Brake Pedal Assembly Replacement .
- Install the cowl side panel.
- Install the step trim plate.
- Connect the front cable to the lever assembly.
- Raise the vehicle.
- Connect the front cable to the park brake cable connector.
- Adjust the park brake. Refer to Park Brake Adjustment .
- Lower the vehicle.