LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 770 (General Hydraulic Brake System) >> Repair Instructions >> Brake Pedal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Safari and 2002 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the brake pedal (1) to the vehicle.
  2. Install the through bolt, spacers and bushings to the vehicle.
  3. Install the nut to the brake pedal pivot bolt. Tighten the nut to 45 N.m (33 lb ft).
  4. Pivot and attach the instrument panel.
  5. Install the booster pushrod (4) and the stoplamp switch (2) to the brake pedal (1). Refer to Stop Lamp Switch Replacement 
scientia non olet · About LEMON Manuals