Circuit Description
WARNING: This page is about a different car, the 2002 GMC Safari and 2002 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
Modules connected to the class 2 serial data circuit monitor for serial data communications during normal vehicle operation. Operating information and commands are exchanged among the modules. Node Alive messages are transmitted by each module on the class 2 serial data circuit about once every 2 seconds. When the module detects one of the following conditions on the class 2 serial data circuit for approximately 3 seconds, the setting of all other class 2 serial communication DTCs is inhibited and a DTC will set.
DTC U1300, U1301 Or U1305
| DTC | Condition |
|---|---|
| U1300 | Low voltage on the class 2 serial data circuit. |
| U1301 | High voltage on the class 2 serial data circuit. |
| U1305 | Low/High voltage on the class 2 serial data circuit. Some modules will set DTC U1305 if they are not capable of distinguishing between a short to battery voltage or ground. |