LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 767 (Transfer Case - NVG 136-NP4 (1-Speed Automatic)) >> Repair Instructions >> Transfer Case Shift Control Module Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Safari and 2002 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the control module in the mounting bracket.
  2. Install the mounting screws for the control module. Tighten the mounting screws to 6 N.m (53 lb in).
  3. Install the electrical connectors in the control module.
  4. Install the lower dash panel.
  5. Install the parking brake assembly. Refer to PARKING BRAKE PEDAL .