LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 767 (Transfer Case - NVG 136-NP4 (1-Speed Automatic)) >> Repair Instructions >> Transfer Case Fluid Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Safari and 2002 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the transfer case drain plug. Tighten the transfer case drain plug to 20 N.m (15 lb ft)

    Important:  When filling the transfer case with the approved fluid level, the transfer case fluid should be level with treads for the fill hole.

  2. Fill the transfer case with the proper amount and type of transfer case fluid. Refer to Capacities - Approximate Fluid .
  3. Install the transfer case fill plug. Tighten the transfer case fill plug to 20 N.m (15 lb ft).
  4. Install the transfer case shield. Refer to Transfer Case Shield Replacement .
  5. Lower the vehicle.