LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 766 (Propeller Shaft And Universal Joints) >> Repair Instructions >> Propeller Shaft Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 GMC Safari and 2002 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the propeller shaft into the transmission.

    Important:  Install a new universal joint whenever a slip joint or companion flange is serviced.

  2. Lubricate the slip joint.
  3. Install the yoke and cross assembly onto the pinion flange.
  4. Align the reference marks on the pinion flange and the propeller shaft rear yoke. Seat the yoke properly.
  5. Install the retainers.
  6. Install the bolts into the pinion flange. Tighten the bolts to 36 N.m (27 lb ft).
  7. Lower the vehicle.
scientia non olet · About LEMON Manuals