Removal Procedure
WARNING: This page is about a different car, the 2002 GMC Safari and 2002 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
Important: The driveline components in this vehicle are factory system-balanced. System balance provides a smoother running driveline operation. Observe the position of all the driveline components. Accurately mark the relationship of the components before removal. These components include the propeller shafts, the drive axles, the pinion flanges, and the output shafts. All components must be reassembled in the exact relationship to each other as they were before removal. Follow the specifications, the torque values, and any measurements made prior to disassembly in order to maintain the factory system balance.
- Raise the vehicle.
- Accurately reference mark the propeller shaft to the front axle flange.
- Remove the bolts from the propeller shaft to the front axle.
- Remove the propeller shaft.