Rear Antenna Feeder Inspection

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

Verify that there is no continuity between the front antenna feeder terminal A and B.
Verify that the continuity is as indicated in the table.

Fig 1: Identifying Rear Antenna Feeder Terminals
Courtesy of MAZDA MOTORS CORP.
- If not as indicated in the table, replace the rear antenna feeder No. 1 or No. 2.
  
  Fig 2: Rear Antenna Feeder Continuity Table
  Courtesy of MAZDA MOTORS CORP.