LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 757 (Lighting System) >> High-Mount Brake Light Removal/Installation >> 4 Door

4 Door

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the trunk lid trim. (See TRUNK LID TRIM REMOVAL/INSTALLATION .)
  3. Remove in the order indicated in the table.
    Fig 1: High-Mount Brake Light (4 Door) With Torque Specifications
    G02566970Courtesy of MAZDA MOTORS CORP.
    REMOVAL ORDER OF HIGH-MOUNT BREAK LIGHT

    Removal Order Part
    1 Connector
    2 Socket
    3 High-mount brake light bulb
    4 Nut
    5 High-mount brake light
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals