LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 756 (Interior Trim) >> Ventilator Grille Removal/Installation >> Passenger's Side

Passenger's Side

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the following parts:
    1. A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION .)
    2. Front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION .)
    3. Front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION .)
    4. Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION .)
    5. Decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION .)
    6. Dashboard center panel (See DASHBOARD CENTER PANEL REMOVAL/INSTALLATION .)
    7. Dashboard garnish (See DASHBOARD GARNISH REMOVAL/INSTALLATION .)
  3. Pull the passenger-side ventilator grille outward and remove it.
  4. Remove the screw, then remove the passenger-side demister grille.
  5. Install in the reverse order of removal.
    Fig 1: Removing/Installing Ventilator Grille - Passenger's Side
    G02566796Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals