LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 749 (Manual Transaxle Clutch) >> Clutch Pedal Inspection >> Clutch Pedal Disengagement Point Inspection

Clutch Pedal Disengagement Point Inspection

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • When performing the following procedure, make sure that the area around the vehicle is free of people or objects as the vehicle might move suddenly.
  1. Apply the parking brake and fix the front and rear of the wheels with the wheel chocks.
  2. Start the engine at idle.
  3. Without depressing the clutch pedal, move the shift lever slowly to the reverse position.
  4. Hold the lever when the gear noise is heard.
  5. Depress the clutch pedal slowly.
  6. Hold the pedal when the gear noise stops (clutch pedal disengagement point).
  7. Measure distance A, verify that they are within specification.
    1. Clutch pedal disengagement stroke 90-110 mm {3.55-4.33 in} (Reference value) 
    1. Pedal stroke 135 mm {5.31 in} (Reference value) 
    Fig 1: Measuring Clutch Pedal Stroke
    G00974982Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals