Clutch Pipe And Clutch Reserve Hose Removal Note

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

Remove the reserve hose from the master cylinder while pressing the point indicated by the arrow in the figure.

Fig 1: Removing Clutch Pipe And Clutch Reserve Hose
Courtesy of MAZDA MOTORS CORP.
Pull the clutch master cylinder clip to the position shown in the figure and pull out the clutch pipe connector straight to detach it.

Fig 2: Pulling Out Clutch Pipe Connector
Courtesy of MAZDA MOTORS CORP.